Categories
Construction

What Does a Building Contractor Do?

Building a house is a complex process that involves a thorough understanding of architectural design, building rules, zoning regulations, and fundamental construction aspects. A residential building contractor is in charge of overseeing the construction of single-family homes as well as multi-unit housing complexes.
The construction and remodeling of businesses, malls, hotels, and other commercial projects is overseen by a commercial building contractor. The majority of building contractors run their own contractors, and many of them previously worked in the construction sector.


Construction Direction and Supervision

All of the subcontractors required to complete the project are found, bid on, and scheduled by a building contractor. For example, if the contractor is in charge of a €1 million project, his price could be in the range of €100,000 to €200,000.

Interaction with Customers

Typically, a prospective new homeowner or business owner speaks with two or three contractors and solicits bids from each. A large contractor may have a section dedicated to analyzing projects and submitting bids. Small contractors are responsible for calculating their own bids. The building contractor, if hired, is in charge of everything from acquiring permits to dealing with Home Owners Associations, ordering materials, arranging code inspections, and managing the construction.

The Contracting Industry

A contracting company might be a sole proprietorship or a large organization with a board of directors, supervisors, site and project managers, and office personnel. The scale and extent of a contractor’s business are frequently linked to the need for housing or commercial development in the contractor’s hometown. In tiny, rural regions, a contractor might hire a few framing carpenters and subcontract other construction services like digging, roofing, electrical, and flooring to specialty contractors. Contracting companies do not have a set organizational standard.

Licensing, testing, and experience

Before starting their own contracting construction, most construction contractors have some experience in the field. This usually entails several years of building with a general contractor. Prior experience is required in some communities.

Individual counties or municipalities may impose tougher licensing requirements, which may include testing, presenting proof of commercial liability insurance, securing surety bonds for specific projects, and limiting the financial scope of a project on which a contractor may bid. Students who want to be any of the sorts of contractors should get a degree in construction management, but hands-on experience is still preferred.

Excavating Contractors: What Do They Do?

Excavation contractors like to tell their pals that they couldn’t stand giving up their childhood dump trucks and had to trade them in for larger equivalents. Excavation contractors are responsible for much more than just hauling dirt around in the construction industry; they also perform site preparation, grading, trenching, and a variety of other soil-related jobs. They do, however, run some pretty massive pieces of heavy machinery.

Preparing the Site

The excavation contractor arrives after the surveying crew defines the home and lot boundaries in a typical residential construction project. The contractor excavates the soil to the needed depth for the new foundation and verifies that it is firm using compaction testing and, if necessary, equipment compaction.

Excavating contractors must be able to use a level and transit to match the grade indicated by the surveying crew because the excavation standards are precise. The excavation contractor backfills around the new foundation after the foundation contractor pours the footers and stem wall. Excavation work, on the other hand, isn’t limited to residential construction.

Contracting and Subcontracting

Excavation contractors are self-employed and are classified as subcontractors because their work is frequently part of a bigger project. Excavation firms can be contacted for a specific job, such as digging a swimming pool, but the excavation contractor will not supervise the entire process. Excavation contractors are frequently directed by general contractors, who solicit bids, arrange subcontractor timetables, and pay the excavation contractor once his portion of the project is completed.

Changing the Dirt

If it involves moving dirt, an excavation contractor is most likely the right person for the job. The contractor can build roads, grade roads, dig ponds and sewers, excavate ditches for water or gas lines, and operate trenchers to place flexible pipes beneath the ground without creating ditches, depending on the equipment he owns or hires. Excavation contractors construct earthen dams and terraced drainage on agricultural land.

Operators and Heavy Equipment

Excavation equipment is both expensive to buy and insure. A small to mid-size excavation contractor will typically own or lease a few large front-end loaders, bulldozers, backhoes, compactors, trenchers, and skid steers. The majority of excavation contractors also operate huge dump trucks for hauling away extra dirt. Because heavy equipment operating requires minimal college or trade school degrees, most contractors will recruit experienced or new operators and train them on the job. Many excavation contractors have experience operating big machinery.

The Business End of Things

The excavation contractor must present competitive bids and estimates, as well as be aware of the current market rate for excavation services in his area. Most states require contractors to be licensed and bonded, which may entail passing a skills and knowledge test as well as demonstrating financial soundness. The contractor sets up an accounting and payroll system, and pays income taxes quarterly in most cases.

Categories
Windows

HOW TO INSTALL BI-FOLD DOORS

Internal bi-fold doors from Gama Doors are perfect for en-suites, cupboards, and wardrobes. They can also be used to create a room divider when fitted in pairs.

When installing your bi-fold door, follow our simple step-by-step guide, and watch the video to see how we fitted a Gama Tigris White bi-fold in our showroom.

Please keep in mind that this installation guide is just for Gama’s white bi-fold doors. Gama’s Oak bi-folds come with different door hardware, and while the technique is identical in general, it differs in several areas, therefore we recommend consulting the installation instructions.

Bi-fold doors from Gama can only be installed in frames without a rebate or a stop.

Bi-fold Doors: How to Install Them

1- Preparation

A ready-to-hang bi-fold door, a mount track, and a set of door hardware will be included in your pack. This pack includes everything you’ll need to fit the door, including step-by-step instructions.

You’ll need the following items to fit the bi-fold door:

• a measuring tape

• practice drills

• philips screwdriver

2- Install the top track

Mark 19mm back from the front edge of the frame head, drill, and screw the top track into position.

3- Attach the pivot plates to the door.

There are a lot of pivot plates that need to be fixed on the door.

Fix the first pivot plate to the top edge of the door’s hanging side. The pivot lock at the plate’s center should be 50mm away from the plate’s hanging edge. Fix this in its proper position.

The roller guide plate should be fixed to the top of the door’s opening side. The pivot lock in the middle of the plate should be 38mm apart from the leading edge. Fix this in its proper position.

The bottom pivot plate should now be placed beneath the door’s hanging side. The pivot lock at the plate’s center should be placed 50mm away from the edge. Fix this in its proper position.

4- Install a jamb bracket

The screw hole in the jamb bracket should now be 30mm from the edge of the frame. Fix this in its proper position.

5- Install a doorknob

Fix your doorknob in the desired location. A place about halfway up the opening side of the bi-fold and 38mm from the central meeting edge is recommended.

6- The bi-fold door should be hung

Lift the bi-fold into position after folding it. Make sure the track pivot lock is unlocked before proceeding.

Place the pivot on the door’s opening side into the track groove first, then the pivot on the door’s hanging side into its receptor. Slide the tab lock once it’s firmly in place.

Insert the bottom pivot into the socket by pressing it down. Secure with two screws if no vertical adjustment is required. If horizontal adjustment is required, the bracket can be adjusted.

7- Snubber should be adjusted

Close the doors and slide the Snubber until the Roller Guide is reached. Open the doors and tighten the Snubber by moving it 3mm closer to the Roller Guide. With a small pull on the handle, the doors should ‘snap’ close and open smoothly.

8- Covered in wood

To hide the track, add a 19mm by 19mm piece of wood at the top and screw it in place.

Categories
electrician

How A 24-Hour Emergency Electrician Can Help You

An electrical outage can be extremely inconvenient and, in certain situations, dangerous to you and your family. An emergency might happen at any time of day or night. Due to wiring breakdown or extreme weather conditions, power outages are the most common emergencies. A power outage in the middle of the night can be extremely frustrating. While you wait for the electricians, you’ll have to find other ways to keep your home lit. Adelaide emergency electricians are always there to assist you in resolving your emergency while ensuring that no one is injured or inconvenienced in the process.

Staying in the dark for an entire night is not a good idea

It’s impossible to predict when your electricity will go off. When this happens, it can cause a lot of havoc in your house. You’ll have to sleep in the dark at night, and important appliances like your refrigerator, fans, and other electrical systems will go down. This can be extremely inconvenient, especially if you reside in a location that experiences extreme weather. Consider what would happen if your heating system failed in the middle of the night during the winter season. In these situations, a 24-hour emergency electrician is needed. When you have an electrical problem, you can call an emergency electrician JLK Electrical in Dublin any time.

Improve your response time

When you choose 24-hour electricians, you can expect speedier and more efficient service. If you have something running or work at home, you can get back to normal as soon as possible when your electrician responds in a timely manner. You don’t need to be concerned about your work at any time of day or night.

Services for the Holidays

Electricians are available 24 hours a day, 7 days a week. They will serve you at any time during the day or night for a period of 24 hours. Most electricians will close their shops over the holidays to spend home with their families. It can be quite inconvenient during such times because finding an electrician to work can be difficult. If you have 24-hour electrician services, however, this will not be the case. They are available at all times, including on Christmas Day. As a result, you do not need to be concerned.

Electrical Appliances Should Be Saved

If there is an electrical emergency, it is extremely likely that certain electrical appliances in your house or workplace may be damaged. If these emergencies aren’t damaged with as quickly as they need to be, the electrical failure could result in a slew of losses, including the damage of a variety of electrical products. It can result in significant time losses for the company. These losses may be prevented with 24-hour emergency electricians because you can have them respond to any situation at any time.

Avoid Injuries

Electrical emergencies can result in serious or fatal injuries in some situations. Some people become frustrated while waiting for professionals and attempt to repair the problem without the necessary tools or knowledge. Such attempts can lead to disasters and, in the worst-case scenario, death. Such situations can be avoided by contacting 24-hour electricians.

Categories
Construction

Tiling a Bathroom – 9 Essential Steps to Get Great Results

To begin, keep in mind that the size of the room should influence many of your options when tiling a bathroom. Large bathroom tiles are not recommended for tiny bathrooms since they might make the space appear more smaller. For small bathrooms, medium or small tiles are a lot better choice.

The majority of bathroom tiles are porcelain or ceramic. They are typically low-cost tiling alternatives. Both options have their advantages. Porcelain tiles are often more durable than ceramic tiles. This does, however, mean that they can be more expensive than ceramic tiles at times. You won’t need to buy tiles that can handle a lot of use if you’re tiling a bathroom wall. As a result, you can choose whatever tile style you like.

Bathrooms are also becoming more fashionable with natural stone tiles. These tiles should be avoided if you are learning how to tile a bathroom for the first time. Stone or limestone tiles are far more porous and absorbent than ceramic or porcelain tiles.

Natural stone tiles, on the other hand, will require much more frequent sealing. If you’re a first-time do-it-yourselfer or short on time, you might want to avoid them because they require a lot of maintenance.

Before you begin tiling a bathroom, always order sample tiles. When shopping for bathroom tiles online or in a store, it can be tricky to visualize the size of a tile. Taking the tiles home and living with them, on the other hand, will give you more confidence that you’ve chosen the proper color and size.

How many tiles will I require?

Getting the proper amount of tiles is crucial to tiling a bathroom successfully. Before you begin, it’s critical that you accurately measure the bathroom. Although it may seem self-evident, always double-check the dimensions of the tiles. Make sure the tiles you chose correlate to your own measurements if you’re measuring your bathroom in centimetres or inches.

There are various online calculators that can work you in determining the exact number of tiles required to cover your bathroom. Always keep in mind that you must be certain that your dimensions are correct.

Always purchase at least 10% extra tiles than you anticipate needing. When it comes to tiling a bathroom, wastage and breakage are unavoidable. Having extra tiles on hand will save you time and money because you won’t have to waste time and money buying them when you’re in the middle of a project.

1. Cleaning and Preparation

Before you begin tiling a bathroom wall, ensure sure your surface has been adequately prepared. Working with a smooth, freshly prepared wall is essential. You won’t obtain professional-looking results if you don’t do it this way. Repairing any mistakes made after tiling a bathroom can be very costly. As a result, it is preferable to devote some time on this aspect of the project.

If you’re tiling a bathroom, you’ll want to make sure the walls are waterproof, solid, and smooth. Applying a tile backer board is a simple way to accomplish this (see the ‘Apply a tile backer board’ section for additional information). You must, however, prepare the wall beneath this step before proceeding.

First and foremost, any previous adhesive, paint, or wallpaper must be removed. If you’re not sure where to begin, we have two guides that explain down the process: how to remove paint and how to remove wallpaper.

To remove any filth and oil, the walls will need to be scrubbed with a TSP solution. This will aid in the appropriate adhesion of the tile backer board and tiles to the wall.

2. Lay Your Tiles Properly Using a Gauge Stick

Making your own gauge stick is one of the simplest and cheapest ways to accurately place your tiles. A gauge stick is simply a piece of wood with the size of your tiles marked on it. This stick can then be used to properly place your tiles.

Place a tile against your gauge stick and position it horizontally. On the stick, make a mark at the end of the tile. Carry on like this all the way down the stick until you run out of room. Remember to provide enough space between each tile for a tile spacer.

After that, rotate the tile vertically and repeat the operation with a new stick. You should now have a gauge stick for measuring the length of your tiles and another for measuring the breadth.

3. Place a Tile Backer Board on the floor.

Using a tile backer board to provide a solid, dry surface to tile on is a terrific way to go. Using a tile backer board in your bathroom has various advantages.

To begin with, tile backer board is suitable with a wide range of tile kinds. Your tiles can be fastened to tile backer board regardless of the material they are made of. Tile backer board, maybe most critically, provides a completely waterproof surface that is especially useful around showers and baths.

If you want an easy way to prepare the surface before you start tiling, using a tile backer board on your wall is a fantastic alternative. It’s available at most good home improvement stores. If you’re buying tile backer board, make sure you’ve measured the area well so you know how much to buy. Always follow the manufacturer’s instructions when using the boards.

4. Make a plan for your guidelines

To identify the center point, run a spirit level over the width of the wall and then vertically. This line will come in handy because it can be used as a guide and will guarantee that your tiles are aligned correctly.

It’s now time to put the gauge stick you made earlier to work. Place the stick along the width of the line you’ve drawn on one end of the wall. Directly on the wall, draw the guidelines that are marked along the gauge stick. When it’s time to put the tiles on the wall, this will serve as a guide.

Typically, you will need to cut a larger tile down to size at the wall’s edges and corners. It’s a good idea to make a mark on your wall with these smaller end tiles so you know what size to cut your larger tiles down to.

5. Begin putting the tiles up on the wall

Starting at the bottom and working your way up is the simplest approach to set your tiles. Add a tile spacer to the side of a tile that is against the wall. This will allow you to leave space on the wall for the adhesive that will hold your tiles in place.

Unless the tile is an end tile that completes the row, you shouldn’t have to cut it. Using a tile cutter, you may easily cut a tile to the desired size. Simply draw a pencil line where you’ll need to cut the tile. To avoid discoloring the tile, draw on the back rather than the front. You should achieve outstanding results if you carefully align the pencil mark with the tile cutter.

Carry on like this throughout the entire length of the wall. You should tile in rows, so start applying glue to the tiles in the bottom row after you’ve placed them out. After that, you can start putting the second row of tiles.

6. Prepare your Waterproof Tile Adhesive and apply it

Mastering the adhesive is one of the most critical aspects of learning how to tile a bathroom. It’s critical to choose a waterproof adhesive for a bathroom. Otherwise, you’ll almost certainly have mold problems in the future.

Many current tile adhesives are pre-mixed, so you won’t have to waste time mixing it yourself. You’ll need a notched trowel to apply the waterproof adhesive. This will guarantee that the glue is evenly distributed throughout the whole surface area.

Apply your glue directly to the tiles that will be utilized in that region if you’re tiling around a bath or shower. You’ll have greater control this way, and you’ll be able to cut the tiles as needed. You can apply the glue straight to the wall if you are dealing with large areas of the wall with no obstructions.

7. Finish External Corners with Wall Trim

If you’re tiling a bathroom and come across an external corner, you’ll need to add wall trims. Thankfully, they’re not tricky to set up. The main advantage of using wall trim is that it will give your room a more polished, professional appearance.

All you have to do is grab a length of wall trim and cut it to the appropriate size for your bathroom. You can use the same adhesive that you used to stick the tiles to the wall to attach it.

Scrape the trim into the wet adhesive using a scraper. Make sure the trim is securely fastened all the way around. This can be accomplished by scraping the trim into the adhesive.

8. Prepare the Grout

It’s critical to get your sealant and waterproofing perfect in a moist bathroom setting. It’s a good idea to spend some time making sure your grout is properly mixed and applied.

Before you begin grouting your tiles, make sure your tile glue has completely dried. The procedure of mixing grout is quite similar to that of mixing plaster. Fill a clean, dry bucket halfway with grout. After that, add some water. Begin mixing the grout and, if necessary, add more water.

When the mixture gets thick and creamy, much like plaster, you’ll know it’s ready to use. Allow a few minutes to pass before beginning to apply it to the wall.

9. Put the Grout in Place

A trowel and a sponge will be needed to apply the grout. Work working the grout into the wall, straight onto the tiles, with a trowel and a sponge. Work the grout into the visible gaps between each tile with special attention.

Work slowly and carefully, completing one little section at a time. Use a clean sponge to wipe away any excess grout if you’ve applied too much in one place.

Before you continue working, make sure the grout has fully sunk into the surface. This usually takes around a quarter of an hour. After the time has passed, sponge down the surface once again. After that, you should re-grout the area you worked on. Allow the area to dry completely after you’ve completed the grouting.

Categories
Construction

What Painting Supplies Do I Need?

Do you need a shopping list for your paint project? You know you’ll need paint, but what about the rest of the supplies? dublindecopainting.ie is everything for to help you get painting faster.

You must first acquire all of the necessary supplies before beginning a room-painting endeavor. If you’re new to painting, you’ll quickly realize that choosing a paint color is only the beginning of the decision-making process. The variety of goods to choose from may appear overwhelming at first, but don’t panic! I’m going to show you some of the essential supplies you’ll need today.

Rolling Pins/Paint Brushes

The following are my three favorite standard paintbrushes:

  1. Painting straight lines around the ceiling, doors, windows, and woodwork with an angled brush. Unless I’m making stripes, I don’t use painter’s tape. I find that an angled brush combined with a quick, steady hand produces a better line than tape. This is referred to as cutting in. I try to buy the best brushes I can afford since they make a significant impact.
  2. A handle and a roller cover. For smooth walls, a nap of 3/8” is ideal.
  3. A little brush for crafts. I buy affordable short bristles craft brushes in quantity from a craft store (the kind you’d use for arts and crafts projects). For leveling out paint lines around doors and window trim, those small brushes come in helpful. They’re also fantastic for cleaning around doorknobs, light fixtures, and other small, difficult-to-reach locations.

Trays for Painting

For painting, I’ve used a variety of trays and containers. I’m not a good painter, but for usage with rollers, I prefer the metal trays without liners. I use plastic cups or disposable plastic containers that I can easily bring up ladders with me while painting trim or places with smaller brushes.

Plastic and tarps

I’m known for being a sloppy painter. I’ll almost certainly get paint on any furniture or carpet in the proximity of my paint job. If I’m worried about splatters, I’ll cover the area with tarps or plastic waste bags. I prefer fabric tarps for floors since they absorb paint better and are less slippery than plastic ones.

Tape

As I previously stated, I rarely use painter’s tape for painting edges unless I’m working on a unique project such as painting stripes. It can, however, be useful for taping off light fixtures or other difficult-to-paint-around locations.

Step Stool & Ladder

I eventually bought my own step stool and ladder this year. I can’t believe I’ve been waiting this long! Both of them have been quite helpful to me while I work on painting my house. There will be no more balancing on chairs or putting myself in dangerous positions! A 6 foot ladder and a little step stool are available to me. If we need to paint tall walls, my husband has tall ladders that he is ready to climb.

Rags

As I already stated, I am a very clumsy painter. I’m aware of this trait in myself, so I gather a few old towels before I begin. I keep some of them wet and some of them dry. I also have a roll of paper towels on hand for any spills. If you don’t have access to a sink, keep a bucket of water on hand to dip your rags into as needed.

iPod or radio

Painting a room is a weekend undertaking that can take a long time. To pass the time, it helps to have your favorite music playing in the background.

Make painting a pleasurable experience, and you’ll be eager to go on to the next area!

Categories
Construction

Bathroom Experts Bathroom Fitting Dublin

Bathroom Experts. has the experience, dependability, and reputation you can rely on. Our bathroom renovation and bathroom installation work in Dublin has satisfied customers and produced results for over 20 years. Our bathroom remodelers work with clients and keep their needs in mind at all times, whether it’s a tiny bathroom remodel in your Dublin home or a major bathroom makeover in a large Dublin property.

When it comes to bathroom design and installation, we assist customers in making the best decision for their particular space. Our house renovations are done with the highest quality materials, at a cost-effective price that you will be delighted with, and range from conventional to contemporary, brick to timber or stone. We understand how bathroom renovations in Dublin can transform your living space, adding elegance and value to your home, and it is our aim to continue that creative process.

Our experience allows us to work on small bathroom remodel works as well as all other bathroom refurbishment and installation projects, all of which are completed by highly qualified local bathroom fitters in Dublin, resulting in a bathroom installation that you will be proud of. Bathroom experts is available to design and install a bathroom makeover in Dublin.

Why should you hire our bathroom fitting and remodeling contractors in Dublin and the surrounding suburbs?

Bathroom Experts has you covered when it comes to bathroom fitting in Dublin. Customers may rest easy knowing that we have years of experience setting industry standards. We are committed to working with clients to get their bathroom renovation right, providing revolutionary bathroom makeovers, as our bathroom renovation work in Dublin demonstrates.

Renovation of a Bathroom

Our local bathroom fitters are up to the task, whether it’s a bathroom renovation to change your Dublin home or a bathroom refurbishment to give an older property a modern vibe.

Our bathroom renovations in Dublin offer tailor-made solutions to create the space that customers desire, based on our years of experience, high-quality materials, and professional attention. Whatever the design requirements, we collaborate with customers to create bathroom renovations that thrill.

Our local bathroom fitters produce new looks that reflect your choice, your style, and your demands, from modest bathroom renovations that make the most of a space to a small bathroom makeover in a historic Dublin property designed to bring the home into the twenty-first century.

With our portfolio of projects, we can demonstrate how bathroom renovations in Dublin should be done and why customers return to us time and time again for bathroom renovations.

BATHROOM RENOVATION AT THE BATHROOM EXPERTS IN DUBLIN: ORGANIZED, PREPARED, PROFESSIONAL

If you need bathroom fitting or renovation work done in Dublin, call Bathroom Experts for highly qualified and reasonably priced professionals. Our years of bathroom installation experience in Dublin enables us to provide the best outcomes for bathroom renovation customers all across the city.

The following are some of the bathroom fitting services we provide in Dublin:

  • RENOVATIONS OF THE ENTIRE BATHROOM
  • TUB LINERS IN ACRYLIC
  • WALL SYSTEMS FOR BATHROOMS CUSTOMIZED
  • RENOVATION OF THE BATHTUB
  • VANITIES MADE TO ORDER
  • SOAKER FOR THE SHOWER DOOR
  • AIR TUBS & WHIRLPOOL
  • BATHTUBS WITH WALK-IN DOORS
  • SOLUTIONS WITHOUT BARRIERS
  • ALL FIXTURES IN THE BATHROOM

Things to Think About When Renovating or Remodeling a Bathroom in Dublin

When it comes to home renovations, a bathroom renovation in your Dublin home necessitates more forethought than most. Your bathroom renovation project in Dublin is all about making the correct choices to provide the bathroom makeovers of your dreams, from practical issues like plumbing and waterproofing to style and design choices for the room.

Fitting, Renovation, and Installation of Bathrooms Refurbished Bathrooms in All Styles Dublin

When it comes to bathroom renovations and remodelling in Dublin, the options are nearly limitless. It’s all about personal taste and producing the aesthetic customers want, whether it’s gorgeous, traditional Victorian style bathroom renovations in stately Dublin mansions or modern, sleek bathroom design and installation work in Dublin loft flats.

Our bathroom renovation projects in Dublin provide excellent customer service and competent assistance from start to finish. Our bathroom renovation professionals in Dublin are ready to assist and offer advice to people who need assistance choosing on bathroom installation work and what design may work best for their home.

Our years of professional industry experience ensure that our bathroom design and installation services in Dublin are designed to assist customers in making well-informed decisions that reflect their personal tastes. We offer bathroom fitting for Dublin properties of all sizes and designs, with finishes that guarantee customer pleasure, whether it’s a color scheme or a layout issue.

Let us save you time and money by providing you with transparent, no-work quotations for all bathroom renovation work in Dublin. For all of your bathroom installation needs in Dublin, contact Bathroom Experts now and let us give your home the beauty it deserves.

Categories
Painting

How to Paint a Room: 10 Steps to Painting Walls Like a DIY Pro

Beginning DIYers, new homeowners, and seasoned home renovation gurus all need to know how to paint a space effectively. After all, it’s generally painless, affordable, and simple to remedy if something goes badly wrong. But before you grab your roller and start rolling on your first coat, make sure you have a strategy in place. To help you started, we contacted a few experts for their finest painting techniques and methods. Continue reading to learn how to paint a room and see what you’ll need to do each step of the way to ensure your project is a success.

1. Make a strategy

Begin by imagining how you want the end project to look, and keep in mind that you aren’t confined to four walls or a whole room in one hue. Consider painting an accent wall in a bright color or using a contrasting shade or finish to showcase moldings. Don’t forget to take a look up to see whether the ceiling may need some TLC as well.

2. Decide on a color

It’s easy to become overwhelmed while looking at fan decks and paint chips. Begin by identifying the basic color characteristics: Do you like a warm or cold color? Is it better to be neutral or saturated? If you have any existing furniture or artwork, think about how the hue will look with it. Choose a few hues and request samples—many direct-to-consumer brands, such as Backdrop and Clare, will send you sticky swatches you can slap on the wall to get a better idea of shade (and it will save you a trip to the store). Examine the colors to see how they seem in the room at various times of the day.

Many paint firms’ Alex Trend Paintersalso feature facilities that allow you to upload a photo of your room and see how different colors would look on the walls. However, because colors might seem differently in different lighting, you’ll need to test it out in the room.

3. Choose your supplies and tools

Every project is different, and depending on the paint you choose and the condition of your walls, you may require various tools, but there are a few must-haves:

  • Paint
  • Roller for paint
  • Extension pole for a paint roller
  • tarpaulins
  • Paintbrushes
  • Tray for painting
  • Sandpaper
  • Tape for painting
  • Rags
  • Knife for applying putty

4. Calculate how much paint you’ll require

According to Carl Minchew, vice president of color innovation and design at Benjamin Moore, the usual rule of thumb for painting a powder room or the exterior of your home is one gallon per 400 square feet. However, this is only a general guideline: Use a paint calculator like the ones provided by Benjamin Moore or Pratt & Lambert to get a more precise number, which you’ll need for large jobs. They take into consideration window and door specifications. (And both projects are based on two coats of paint.)

Do you want to whitewash a charcoal gray wall? When transitioning from dark to light, you’ll probably need more paint. A rich color base, on the other hand, requires more coats of paint than a lighter hue, according to Carolyn Noble, color marketing and design manager at Pratt & Lambert. To help limit the amount of applications, she suggests adding a gray-tinted primer to the surface before painting your walls a vivid hue. You may have heard that the glossier the finish, the higher the coverage rate, but Minchew says there isn’t enough of a difference to impact the amount of gallons you need to buy.

Buy a little extra if you’re painting a highly textured surface rather than a smooth one, suggests Julianne Simcox, associate brand manager at Pratt & Lambert. Cabinets with intricate millwork will also require more paint; Minchew recommends buying around 10% more than estimated.

5. Prepare the room and the walls

If you don’t want to ruin your favorite sofa or the heirloom Grandma gave you, remove all of the furniture from the room. Push everything to the center of the room if you don’t have enough space to shift anything. Cover the pieces with a drop cloth or lightweight plastic sheeting, as well as the floor and any cupboards or worktops that may be vulnerable to splatter. John Colaneri and Anthony Carrino, stars of the HGTV shows Cousins Undercover and Kitchen Cousins, as well as The Build Up and Grand Design on Ellen DeGeneres’ Ellentube, add, “Don’t miss the drop cloth—paint will splatter, we swear.”

Take a roll of painter’s tape—the cousins prefer FrogTape—and apply it firmly to the room’s corners, base and crown moldings, and door and window casings, sealing any gaps with a putty knife if necessary. “Getting a strong seal so paint doesn’t go beneath the tape is crucial,” Colaneri and Carrino explain. “Plus, it will pull away clean after everything is dry.” You can completely avoid tape if you dare (or have an artist’s steady hand). To protect outlets and switches from paint drips, remove light switch and outlet covers and cover them with painter’s tape.

6. Prepare your paint

Stir the paint with a wooden paint stick and re-stir as needed during the project. If you don’t stir your paint constantly, the ingredients will separate, and you’ll risk losing the true color you want. If you’re using more than one gallon of paint, mix the cans together in a big bucket in case there’s a color difference.

7. Select your painting methods

Your paint is mixed and your roller is ready, but before you begin, make sure you have a strategy in mind. Begin at the top of the room and work your way down, beginning with the ceilings. Do you want to make a statement with a large focal wall? First, paint the adjacent light-colored walls. “Don’t worry if you spill paint on the wall that will be your accent wall; the dark paint will cover up any lighter paint. Tape off that edge when the lighter wall dries so the dark color doesn’t leak over your new paint,” Colaneri and Carrino suggest. Plan on three coats if you’re covering dark walls with a brighter color: your primer, plus two coats of the new color to make sure nothing shows through.

One wall at a time should be tackled. Paint along the molding and corners from top to bottom using a brush, while your painting partner covers the broad expanse of the wall with a roller, avoiding the more exact locations. Use long strokes in a W pattern while applying paint with the roller for maximum coverage (and to avoid those pesky roller marks). The wall is ready for a second coat once it is dry to the touch.

Remove the painter’s tape and wait for the walls to dry before putting tape to the walls if you’re painting the trim. Begin with the ceiling trim, then move on to the door and window frames, and finally the baseboards.

8. Don’t forget about the ventilation

It’s not fun to watch paint dry. Open windows and use fans to keep your place adequately aired throughout the project. The cousins believe that keeping the room warm and having a fan blowing helps speed up the drying process. “If it’s a wet day, the paint will take significantly longer to dry.”

9. Take care of the mess

You’ve applied many layers, but it’s not quite time to unwind. Remove all of the painter’s tape and gather drop cloths, ensuring that any spills or splatters are completely dry before moving them. Clean brushes with soapy water for latex and water-based paints, but mineral spirits for oil-based paints. Cleaning and reshaping bristles can be done with a painter’s brush. Use the curved edge of a 5-in-1 tool to remove extra paint off roller covers under running water if you wish to reuse them (they’re also useful for opening paint cans, removing nails, and scraping).

10. Allow adequate time for yourself

The length of time it takes to complete your job is determined on the size of the room, the method you use to paint, and your skill level. Using a dark color on the walls and painting the ceiling and trim, for example, will take longer than simply painting the walls a neutral hue. Some places can be completed in a matter of hours, while others may take many days. Make sure you budget for more time than you think the project will take, and don’t forget to account for prep and cleanup.

Categories
Construction

OS HOLDING ARE THE LEADING PROVIDER OF HOME, KITCHEN AND SIDE RETURN EXTENSIONS IN Dublin

CHECK OUT SOME OF OUR LATEST WORK

osholding.ie provides cost-effective home extensions in Dublin.
Extensions to a house or a kitchen are reasonably inexpensive and extremely adaptable. Many families are simply priced out of the market for a new home in the current financial situation, with Dublin house prices continuing to rise. Fortunately, a home extension in Dublin, whether it’s a kitchen, wrap-around extension, flat roof extension, back extension, or side return extension, may give them with the extra space they require. House extensions can help you create a better home without breaking the bank, so contact our Dublin home extension builders now.

Of course, while home or kitchen extensions are less expensive than buying a home, they still demand a significant amount of labor and time from the initial site inspection to the final décor. Simply Loft extension contractors take pleasure in offering the most straightforward, clear, and thorough home remodeling and domestic extension building service in Dublin .

Home Extension Design & Planning Services in Dublin by OS Holding

We can help you with an entirely new house extension in North Dublin, a two-storey back home extension in South Dublin, a side return house extension in West Dublin, a conventional house extension in East Dublin, or even a whole apartment restoration. We create extension designs based on your requirements and ensure that our work complies with all building standards and municipal planning requirements. Meanwhile, fixed costs and timeframes ensure that you know exactly how much you’ll have to pay and how long our professional builders will be on site.

Your dedicated project manager will be accessible to answer any questions you may have along the process, and regular progress meetings will keep you informed about the development of your Dublin house extensions project.