Tiling a Bathroom – 9 Essential Steps to Get Great Results

To begin, keep in mind that the size of the room should influence many of your options when tiling a bathroom. Large bathroom tiles are not recommended for tiny bathrooms since they might make the space appear more smaller. For small bathrooms, medium or small tiles are a lot better choice.

The majority of bathroom tiles are porcelain or ceramic. They are typically low-cost tiling alternatives. Both options have their advantages. Porcelain tiles are often more durable than ceramic tiles. This does, however, mean that they can be more expensive than ceramic tiles at times. You won’t need to buy tiles that can handle a lot of use if you’re tiling a bathroom wall. As a result, you can choose whatever tile style you like.

Bathrooms are also becoming more fashionable with natural stone tiles. These tiles should be avoided if you are learning how to tile a bathroom for the first time. Stone or limestone tiles are far more porous and absorbent than ceramic or porcelain tiles.

Natural stone tiles, on the other hand, will require much more frequent sealing. If you’re a first-time do-it-yourselfer or short on time, you might want to avoid them because they require a lot of maintenance.

Before you begin tiling a bathroom, always order sample tiles. When shopping for bathroom tiles online or in a store, it can be tricky to visualize the size of a tile. Taking the tiles home and living with them, on the other hand, will give you more confidence that you’ve chosen the proper color and size.

How many tiles will I require?

Getting the proper amount of tiles is crucial to tiling a bathroom successfully. Before you begin, it’s critical that you accurately measure the bathroom. Although it may seem self-evident, always double-check the dimensions of the tiles. Make sure the tiles you chose correlate to your own measurements if you’re measuring your bathroom in centimetres or inches.

There are various online calculators that can work you in determining the exact number of tiles required to cover your bathroom. Always keep in mind that you must be certain that your dimensions are correct.

Always purchase at least 10% extra tiles than you anticipate needing. When it comes to tiling a bathroom, wastage and breakage are unavoidable. Having extra tiles on hand will save you time and money because you won’t have to waste time and money buying them when you’re in the middle of a project.

1. Cleaning and Preparation

Before you begin tiling a bathroom wall, ensure sure your surface has been adequately prepared. Working with a smooth, freshly prepared wall is essential. You won’t obtain professional-looking results if you don’t do it this way. Repairing any mistakes made after tiling a bathroom can be very costly. As a result, it is preferable to devote some time on this aspect of the project.

If you’re tiling a bathroom, you’ll want to make sure the walls are waterproof, solid, and smooth. Applying a tile backer board is a simple way to accomplish this (see the ‘Apply a tile backer board’ section for additional information). You must, however, prepare the wall beneath this step before proceeding.

First and foremost, any previous adhesive, paint, or wallpaper must be removed. If you’re not sure where to begin, we have two guides that explain down the process: how to remove paint and how to remove wallpaper.

To remove any filth and oil, the walls will need to be scrubbed with a TSP solution. This will aid in the appropriate adhesion of the tile backer board and tiles to the wall.

2. Lay Your Tiles Properly Using a Gauge Stick

Making your own gauge stick is one of the simplest and cheapest ways to accurately place your tiles. A gauge stick is simply a piece of wood with the size of your tiles marked on it. This stick can then be used to properly place your tiles.

Place a tile against your gauge stick and position it horizontally. On the stick, make a mark at the end of the tile. Carry on like this all the way down the stick until you run out of room. Remember to provide enough space between each tile for a tile spacer.

After that, rotate the tile vertically and repeat the operation with a new stick. You should now have a gauge stick for measuring the length of your tiles and another for measuring the breadth.

3. Place a Tile Backer Board on the floor.

Using a tile backer board to provide a solid, dry surface to tile on is a terrific way to go. Using a tile backer board in your bathroom has various advantages.

To begin with, tile backer board is suitable with a wide range of tile kinds. Your tiles can be fastened to tile backer board regardless of the material they are made of. Tile backer board, maybe most critically, provides a completely waterproof surface that is especially useful around showers and baths.

If you want an easy way to prepare the surface before you start tiling, using a tile backer board on your wall is a fantastic alternative. It’s available at most good home improvement stores. If you’re buying tile backer board, make sure you’ve measured the area well so you know how much to buy. Always follow the manufacturer’s instructions when using the boards.

4. Make a plan for your guidelines

To identify the center point, run a spirit level over the width of the wall and then vertically. This line will come in handy because it can be used as a guide and will guarantee that your tiles are aligned correctly.

It’s now time to put the gauge stick you made earlier to work. Place the stick along the width of the line you’ve drawn on one end of the wall. Directly on the wall, draw the guidelines that are marked along the gauge stick. When it’s time to put the tiles on the wall, this will serve as a guide.

Typically, you will need to cut a larger tile down to size at the wall’s edges and corners. It’s a good idea to make a mark on your wall with these smaller end tiles so you know what size to cut your larger tiles down to.

5. Begin putting the tiles up on the wall

Starting at the bottom and working your way up is the simplest approach to set your tiles. Add a tile spacer to the side of a tile that is against the wall. This will allow you to leave space on the wall for the adhesive that will hold your tiles in place.

Unless the tile is an end tile that completes the row, you shouldn’t have to cut it. Using a tile cutter, you may easily cut a tile to the desired size. Simply draw a pencil line where you’ll need to cut the tile. To avoid discoloring the tile, draw on the back rather than the front. You should achieve outstanding results if you carefully align the pencil mark with the tile cutter.

Carry on like this throughout the entire length of the wall. You should tile in rows, so start applying glue to the tiles in the bottom row after you’ve placed them out. After that, you can start putting the second row of tiles.

6. Prepare your Waterproof Tile Adhesive and apply it

Mastering the adhesive is one of the most critical aspects of learning how to tile a bathroom. It’s critical to choose a waterproof adhesive for a bathroom. Otherwise, you’ll almost certainly have mold problems in the future.

Many current tile adhesives are pre-mixed, so you won’t have to waste time mixing it yourself. You’ll need a notched trowel to apply the waterproof adhesive. This will guarantee that the glue is evenly distributed throughout the whole surface area.

Apply your glue directly to the tiles that will be utilized in that region if you’re tiling around a bath or shower. You’ll have greater control this way, and you’ll be able to cut the tiles as needed. You can apply the glue straight to the wall if you are dealing with large areas of the wall with no obstructions.

7. Finish External Corners with Wall Trim

If you’re tiling a bathroom and come across an external corner, you’ll need to add wall trims. Thankfully, they’re not tricky to set up. The main advantage of using wall trim is that it will give your room a more polished, professional appearance.

All you have to do is grab a length of wall trim and cut it to the appropriate size for your bathroom. You can use the same adhesive that you used to stick the tiles to the wall to attach it.

Scrape the trim into the wet adhesive using a scraper. Make sure the trim is securely fastened all the way around. This can be accomplished by scraping the trim into the adhesive.

8. Prepare the Grout

It’s critical to get your sealant and waterproofing perfect in a moist bathroom setting. It’s a good idea to spend some time making sure your grout is properly mixed and applied.

Before you begin grouting your tiles, make sure your tile glue has completely dried. The procedure of mixing grout is quite similar to that of mixing plaster. Fill a clean, dry bucket halfway with grout. After that, add some water. Begin mixing the grout and, if necessary, add more water.

When the mixture gets thick and creamy, much like plaster, you’ll know it’s ready to use. Allow a few minutes to pass before beginning to apply it to the wall.

9. Put the Grout in Place

A trowel and a sponge will be needed to apply the grout. Work working the grout into the wall, straight onto the tiles, with a trowel and a sponge. Work the grout into the visible gaps between each tile with special attention.

Work slowly and carefully, completing one little section at a time. Use a clean sponge to wipe away any excess grout if you’ve applied too much in one place.

Before you continue working, make sure the grout has fully sunk into the surface. This usually takes around a quarter of an hour. After the time has passed, sponge down the surface once again. After that, you should re-grout the area you worked on. Allow the area to dry completely after you’ve completed the grouting.